Now showing 1 - 2 of 2
  • Publication
    RESEARCHING THE PROCESS OF LASER STRUCTURING OF THE SURFACE OF ALUMINUM
    (2023-06-13)
    Kevins Bulavskis
    ;
    Emil Yankov
    ;
    ;
    In this scientific study, the ability to modify the surface using nanosecond 1064 nm fiber laser by controlling the speed and scanning line step in the marking process was demonstrated. An experimental matrix for laser marking was developed, consisting of 8 columns for marking line step and 5 rows for marking speed. The laser marked surfaces were measured using a laser scanning microscope and compared with the surface as supplied. From the obtained deviations of roughness Ra, Rz and Rq as a function of marking speed and marking line step, graphical dependencies were constructed for comparative analysis. The modified roughness is also compared with the roughness as supplied. Within this research the effect of laser treatment on the hydrophilicity/hydrophobicity of the surface was studied as well. Plots of dependences of the contact angle CA, the marking line step Δx and the overlap coefficient Ksoc are plotted.
  • Publication
    Investigation of Surface Structure in the Laser Marking Process as a Function of Speed and Raster Step
    In this research, an experiment was conducted to change the technological properties of the surface by laser marking. The influence of the speed v of 50 mm/s, 75 mm/s and 100 mm/s and the raster step Δx from 20 µm to 80 µm at a constant average power P = 19.2 W and pulse duration τ = 4 ns was investigated. These parameters during the laser marking of AISI 304L steel have a significant change in microhardness and surface roughness. High hardness was found to be achieved at higher powers and small pitch. Analysis of the results showed that as the raster step increases, the roughness of the marked sample decreases. The effect of linear energy density and overlap factor on the process was also investigated. The microhardness of the machined surfaces increases with an increase in the linear energy density and the overlap coefficient, in the first case the dependence is almost linear, and in the second - nonlinear. Varying the marking speed and raster pitch in laser surface texturing of AISI 304L steel has a significant effect on the surface hardness and roughness, changing HV from 260 HV to 766.5 HV and Ra from 1.75 µm to 4.3 µm, respectively, which are the subject of the present analysis. research.