Effect of Laser Marking Speed, Power and Pitch on Hardness and Roughness of Aisi 304l

In this study, an experiment was conducted to change the technological properties of the surface by infra-red laser marking. The influence of power, speed and raster step was investigated. These parameters during laser marking of AISI 304L steel have a significant change on the microhardness and surface roughness. It was found that high stiffness is achieved at higher powers and small pitch. An analysis of the results showed that as the raster step increases, the roughness of the marked sample decreases. The influence of linear energy density and overlap factor on the process was also investigated. The microhardness of the treated surfaces increases with an increase in the linear energy density and the overlap coefficient, and in the first case the dependence is almost linear, and in the second - non-linear.